Top 4 Barbell Clips You Should Try
Four barbell clips that keep your plates locked down so you can focus on technique, plus the Battle Lax training gear that turns gym strength into stick strength.
LaxDrip is reader supported. When you buy through links on this page we may earn a commission at no extra cost to you. How we review.
The right gear can make or break your workout. The best barbell clip keeps your plates in place so you can focus on technique and squeezing out those last few reps.
It's all about finding equipment that blends function, comfort and a bit of flair. Something as small as a collar matters more than you'd think. I've seen a plate slide off mid-set in a high school weight room in Virginia Beach, and nobody forgets that sound. Building your setup at home? Start with our top bench options for lacrosse weight training, then lock it down with one of these.
Let's take a look at the top barbell clips.
The top 4 barbell clips
- Lock-Jaw Olympic Barbell Collars
- Nordic Lifting 2-Inch Barbell Clamps
- Fox Claw Stainless Steel Barbell Collars
- Clout Fitness Olympic Barbell Clamps
Compare all 4
| # | Clip | Best for | Pair | |
|---|---|---|---|---|
| 01 | Lock-Jaw Olympic | Most durable | 9/10 | Pair |
| 02 | Nordic Lifting Clamps | Quick weight changes | 8/10 | Pair |
| 03 | Fox Claw Steel | Heavy loads | 9/10 | Pair |
| 04 | Clout Fitness Clamps | Budget | 8.5/10 | Pair |
Barbell clip reviews
1) Lock-Jaw Olympic Barbell Collars
The collar you see in college weight rooms, built to outlast the competition.
Key features:
- Design: Engineered for ease of use and reliability
- Fit: Olympic barbells
- Hold: Keeps weights firmly in place
- Speed: Easy to attach and remove
Lock-Jaw Olympic Barbell Collars are built for top-end durability and performance, which makes them a favorite among coaches, universities and gym rats alike. Walk into most D1 weight rooms and you'll see them on the bars.
Whether you're lifting at home or in a commercial gym, these collars are engineered to lock your weights down for any exercise that uses an Olympic barbell. They're made from high-quality materials and built to outperform and outlast the competition.
- Exceptional durability
- Innovative design
- Works for a wide range of exercises
- Secure grip
- Slightly higher price than some competitors
Who it's for: Players who want the same collar their college strength coach uses.
At Battle Lax: Battle Lax doesn't sell barbell clips, so pick up the Lock-Jaw Olympic Barbell Collars wherever you buy your gym gear. To turn that strength into stick strength, pair it with the Power Shaft Lacrosse Trainer (from $64.95).
2) Nordic Lifting 2-Inch Barbell Clamps
Quick-release clamps with a secure, non-slip grip on 2-inch bars.
Key features:
- Release: Quick-release mechanism
- Hold: Locks onto the bar securely
- Materials: High-quality materials
- Fit: 2-inch (50 mm) Olympic barbells
The Nordic Lifting clips are 2-inch barbell clamps for lifters who need a secure, non-slip grip on their Olympic barbells. These quick-release collars are praised for durability and ease of use.
They're ideal for a range of lifts and keep the plates firmly in place. The quick release really shines in a circuit, when you're swapping weight between sets and don't want to lose your rest time fighting with a collar.
- Secure, non-slip grip for safer lifting
- Quick release makes weight changes fast and easy
- Durable enough for regular, intense use
- Less premium materials
- Not as durable as the Lock-Jaw
Who it's for: Players running fast circuits with lots of plate changes.
At Battle Lax: Battle Lax doesn't sell barbell clips, so pick up the Nordic Lifting 2-Inch Barbell Clamps wherever you buy your gym gear. To turn that strength into stick strength, pair it with the Champion Sports Agility Ladder ($56.99).
3) Fox Claw Stainless Steel Barbell Collars
A T-screw lock on stainless steel for the strongest hold on our list.
Key features:
- Material: Chrome-plated stainless steel
- Lock: T-screw locking mechanism
- Grip: Firm, non-slip
- Use: Easy one-hand on and off
- Fit: Olympic bar sleeves (50 mm / 2")
Fox Claw Stainless Steel Barbell Collars are built for the serious lifter who needs to handle heavy loads. The chrome-plated stainless steel gives them a much longer life than spring clips or ABS plastic collars.
They're made for 2-inch Olympic bars, giving a secure fit and reliable performance. What sets them apart is the T-screw locking design, a mix of safety, durability and ease of use that's hard to find in other collars. If you're a pole pushing heavy squats in the offseason, this is the one I'd trust on the bar.
- Stainless steel build for durability and long life
- T-screw lock gives a secure grip
- Screw lock creates the strongest hold
- Thin collars leave room for the most plates on the bar
- Tightening and loosening can be tough on the fingers
- Can scratch a new barbell if tightened too hard
Who it's for: Lifters moving heavy weight who want the tightest lock.
At Battle Lax: Battle Lax doesn't sell barbell clips, so pick up the Fox Claw Stainless Steel Barbell Collars wherever you buy your gym gear. To turn that strength into stick strength, pair it with the Power Shaft Lacrosse Trainer (from $64.95).
4) Clout Fitness Olympic Barbell Clamps
A great-priced set of clamps with a one-move locking mechanism.
Key features:
- Material: Plastic, with stainless steel pins
- Speed: Fast, efficient weight swaps
- Fit: Snug clamp, Olympic 2" (50 mm)
- Color: Black
- Weight: 9.29 oz
The Clout Fitness Olympic Barbell Clamps fit 2-inch (50 mm) Olympic barbells. Stainless steel pins add durability under heavy weight, and rubber pads create a snug fit on the bar so the plates won't slide off.
Overall, this is a great-priced set of clamps that's easy to use thanks to the one-move locking mechanism. It's a solid pick for a young player setting up a first home gym on a budget.
- Quick-release mechanism
- Secure grip
- Fits 2-inch Olympic barbells
- Budget-friendly
- Inexpensive materials
- Cheaper feel
Who it's for: Players building a home gym on a budget.
At Battle Lax: Battle Lax doesn't sell barbell clips, so pick up the Clout Fitness Olympic Barbell Clamps wherever you buy your gym gear. To turn that strength into stick strength, pair it with the Champion Sports Deluxe Lacrosse Rebounder ($270.00).
Lacrosse training gear at Battle Lax
The weight room builds the engine, but you still have to put that strength into your stick. Battle Lax doesn't sell gym equipment, but here's the lacrosse training gear we'd add to any home setup (for more ideas, see our lacrosse training aids guide):
Power Shaft Lacrosse Trainer
A weighted training shaft that takes your bench strength to the stick.
The Power Shaft is a 30-inch solid metal training shaft that adds weight to your stick to build muscle memory, shot power and control. Use it for wall ball, shooting, face-offs and defensive checks. The Light model weighs 2.2 lbs and the Heavy and Goalie models 4 lbs. Prices run from $64.95 (Women's) to $79.95 (Heavy and Goalie).
Champion Sports Agility Ladder
Footwork work for the days you're not under the bar.
Strength without footwork won't get you past a short-stick D-middie. Ladder drills on your off days sharpen your first step, change of direction and dodging.
Champion Sports Deluxe Lacrosse Rebounder
Get your reps in between sets.
Your home gym isn't complete without a place for wall ball. A rebounder lets you get your stick work in right after a lift, with no brick wall required.
Pearl X Lacrosse Balls (Greaseless)
Game-quality balls for your home reps.
A good bucket of balls keeps your shooting and wall ball sessions moving. The Pearl X is a greaseless, game-quality ball at $19.99.
Shop field and training gear at Battle Lax
Fuel the work: lifting days need recovery. See our picks for the best protein bars, the best water bottles for lacrosse players, and the best wrist straps for heavy pulls. For backyard shooting, check out the best lacrosse rebounders.
People also ask
Do I need barbell clips?
Yes. Clips (also called collars) keep plates from sliding off the bar, which keeps the load balanced and protects you, your spotter and your floor. Use them on every lift, not just heavy ones.
What size barbell clips do I need?
Olympic barbells take 2-inch (50 mm) clips, which is what every clip on our list fits. Standard 1-inch bars need smaller standard-size collars.
Are spring clips or lock collars better?
Lock collars like the Lock-Jaw, Fox Claw and Clout hold the plates tighter and are quicker to use than old-school spring clips, which can loosen and pinch your fingers.
